{"id":499,"date":"2026-10-08T14:48:03","date_gmt":"2026-10-08T06:48:03","guid":{"rendered":"http:\/\/www.dealz17.com\/blog\/?p=499"},"modified":"2026-10-08T14:48:03","modified_gmt":"2026-10-08T06:48:03","slug":"how-to-store-pop-up-displays-when-not-in-use-49ba-34a99d","status":"publish","type":"post","link":"http:\/\/www.dealz17.com\/blog\/2026\/10\/08\/how-to-store-pop-up-displays-when-not-in-use-49ba-34a99d\/","title":{"rendered":"How to store pop up displays when not in use?"},"content":{"rendered":"

As a pop up displays supplier, I\u2019ve spent the last 8 years hauling, repairing, and storing hundreds of these trade show workhorses\u2014and I can tell you firsthand that most of the damage I see isn\u2019t from rough trade show floors or overeager attendees. It\u2019s from bad storage. I\u2019ve watched a client\u2019s 10ft retractable banner warp so badly it couldn\u2019t be reeled out for a Midwest retail pop up because they stuffed it in a basement closet next to holiday lights. I\u2019ve fielded panic calls from a startup that stored their fabric pop up in a damp garage, only to find mold spots when they needed it for a national conference. The good news? Storing your pop up displays correctly when they\u2019re not in use doesn\u2019t have to take a ton of time, space, or money. It just takes knowing what your display is made of, how it\u2019s structured, and avoiding the tiny, avoidable mistakes that turn a $2,000 setup into a doorstop. Let\u2019s break this down by material\u2014because a fabric pop up, aluminum frame, and acrylic counter all have very different storage needs\u2014and end with the small daily habits that will make your displays last years, not just a few shows. Pop Up Displays<\/a><\/p>\n

<\/p>\n

First, let\u2019s talk about why this matters beyond just keeping your gear usable. Every time you store a display incorrectly, you\u2019re not risking just one show; you\u2019re cutting into your return on investment. A high-quality pop up display should last 50+ setups and takedowns if cared for properly. But I\u2019ve replaced frames for clients after 10 shows because they were stored rolled too tight, or stretched fabric that\u2019s now permanent crease because it was crammed into a box without support. Last year, one of my regular trade show clients had to replace 3 of their 4 displays ahead of a big industry conference because they\u2019d been stacking them in a hallway closet for 6 months\u2014frames bent, fabric snagged, light stands scuffed beyond repair. That\u2019s $6,000 wasted, just because they skipped a 10-minute step when packing up their last show.<\/p>\n

Let\u2019s start with the most common type: fabric pop up displays. These are the ones with the tensioned, dye-sublimated panels that slide onto a frame, right? The number one mistake I see here is rolling them too tight, or folding them harshly. Fabric (especially polyester or the heavier proprietary blend we use for our displays) holds creases, and those creases never fully go away\u2014they show up like smudges when you try to set up, making your entire booth look unprofessional. So for fabric panels, here\u2019s the rule: roll them, don\u2019t fold them. But not just any roll. First, never roll a wet or even slightly damp panel. I can\u2019t stress this enough. If you have to pack up mid-rain, or your fabric gets spit on by a attendee with a soda, wipe it down with a dry microfiber cloth as soon as possible, then hang it in a cool, dry spot for 2 hours before rolling. Rolling damp fabric traps moisture, leading to mold, mildew, and even fabric degradation over time. That\u2019s a problem no iron (or even a professional dry cleaner) can fix.<\/p>\n

When you do roll fabric panels, use a soft, non-abrasive core. A lot of people grab a cardboard shipping tube from the office, but those are often dusty, and the rough cardboard can snag the dye-sublimated ink (especially on high-gloss fabric). We recommend using a PVC or foam core tube that\u2019s at least 3 inches in diameter\u2014smaller than that and you\u2019ll get sharp creases. If you don\u2019t have a purpose-made core, wrap the fabric around a folded soft blanket or a pool noodle (yes, a pool noodle works in a pinch, just cover it with a clean sheet first to avoid transfer marks). Roll the fabric loosely, not tight\u2014you want enough give that the panel doesn\u2019t stretch or crease deeply, just enough to fit into a storage bag. Speaking of bags: always use the padded, breathable storage bag that came with your display. These aren\u2019t just random bags\u2014they\u2019re designed to protect the fabric from dust, UV light (which fades ink over time, even in storage), and minor scuffs. Skip the plastic garbage bags; they trap moisture and cause that mold we talked about.<\/p>\n

Now for the frame: the aluminum or steel skeleton that holds the fabric (or acrylic, in the case of counter displays). Frames are surprisingly delicate, even if they look tough. The biggest mistake here is dismantling the frame and stuffing all the parts into a box without organizing them. You\u2019ll end up with tiny pins, connectors, and adjustment clips scattered at the bottom, and you\u2019ll waste 20 minutes hunting for them at your next show, while your competitors set up without you. For frame storage: first, clean it. Trade show floors are full of dust, floor adhesive residue, and even little bits of candy or gum that stick to frame joints. Wipe down aluminum frames with a dry microfiber cloth (never use harsh chemicals\u2014they can scratch the finish) and use a small brush (an old toothbrush works great) to get into the tight joints and remove any dirt. For steel frames, a tiny bit of light lubricant on the moving joints once a quarter will keep them from rusting\u2014just wipe off the excess so it doesn\u2019t get on your fabric later.<\/p>\n

When it comes to putting frame parts away: don\u2019t just toss them into a box. Use the same storage bag or case that came with your display, which usually has separate compartments for frame pieces. If you lost the original case, get a durable plastic storage bin with dividers (labeled, if you have multiple displays\u2014\u201c10ft Left Frame,\u201d \u201c8ft Right Frame\u201d) so pieces don\u2019t rub against each other and scratch. Pro tip: keep a Ziploc bag labeled \u201cframe connectors and pins\u201d that you tape to the inside of the bin, so you don\u2019t lose the tiny parts you\u2019ll need to set up. I\u2019ve seen more frames ruined by lost parts than any other issue\u2014clients try to set up a display and can\u2019t find the corner pin, so they bend a frame to hold it together, breaking the aluminum.<\/p>\n

Next, retractable banner stands\u2014another super popular pop up display, especially for smaller trade shows or retail pop ups. These are the ones with the roller mechanism inside the base, and the printed banner that rolls up. Storing these incorrectly is a surefire way to break the roller. The big mistake here is leaving the banner partially extended when you put it away. If you leave 6 inches of banner out, the roller has to hold that tension every time you store it, which wears down the spring over time, making it stop retracting smoothly. Always retract the banner fully, but here\u2019s another trick: once it\u2019s fully retracted, roll it back out 1 inch, then retract it again. That takes the tiny bit of extra tension off the spring, so it lasts longer. Also, never store a retractable banner in an extreme temperature\u2014like a hot car trunk in summer, or a freezing garage in winter. Extreme heat warps the plastic and breaks down the roller spring, while extreme cold makes the plastic brittle and prone to cracking. We had a client last year who stored 5 retractable banners in his work truck over a Texas summer; by fall, half of them wouldn\u2019t retract at all, and two had cracked bases.<\/p>\n

What about counter displays, tabletop pop ups, and acrylic accessories? These are often the most overlooked because they\u2019re smaller. Tabletop displays, which are usually lightweight fabric or PVC panels, follow the same rule as their larger counterparts: roll fabric, fold PVC (but only along the factory-made fold lines\u2014don\u2019t create new creases). Acrylic counters and stands? These scratch super easily, so wrap them in a soft cloth or bubble wrap (anti-static bubble wrap, if you have it) before putting them away, and never stack heavy items on top of them. I once had a client stack a stack of trade show catalogs on an acrylic counter during storage, and the counter developed a permanent scratch that showed up every time they used it for client meetings. Also, for counter displays that have electrical components (like built-in LED lights), always disconnect the power source, wipe down the LED strip with a dry cloth, and store the power adapter in a separate labeled bag\u2014never leave cords tangled around the display, as this can fray the wiring over time.<\/p>\n

Now, the big question: where do you store all this? Location matters just as much as how you pack. The ideal storage spot is a climate-controlled, dry space\u2014like a spare office closet, a climate-controlled storage unit, or a designated shelf in your warehouse. Avoid basements, garages, attics, or outdoor spaces. Basements are prone to dampness and mold, garages get temperature swings and are often dirty, attics get too hot in summer and too cold in winter, and outdoor storage exposes everything to UV rays, rain, and pests (rodents love to chew on fabric frames\u2014yes, that\u2019s a real problem). If you have to use a garage, invest in a heavy-duty plastic storage bin with a tight seal (to keep dust and pests out) and place it on a shelf off the floor, not on the concrete, which can get damp. For multiple displays, arrange them in your storage space so heavier items (like counter displays or frame bins) are on the bottom, and lighter items (like fabric panels or retractable banners) are on top\u2014this prevents crushing and bending.<\/p>\n

A few pro tips I\u2019ve picked up over the years that aren\u2019t in any instruction manual: First, take a photo of your fully assembled display before you break it down, store that photo on your phone, and tape a printed copy to the outside of your storage bin or bag. When you\u2019re setting up next, you don\u2019t have to hunt for the assembly guide or guess which frame piece goes where\u2014you just pull out the photo. It saves so much time, especially if you have multiple displays. Second, do a quick pre-storage check every time: inspect fabric panels for snags or loose threads, check frame joints for dirt, make sure retractable banners roll smoothly. Fix small issues before you store them\u2014snip loose threads, tighten loose frame screws, that way you don\u2019t have to do it all right before a show. Third, if you\u2019re storing displays for longer than 3 months, take a quick refresh: pull fabric panels out of their tube, hang them for an hour to release any minor creases, wipe down frames, and rearrange storage so nothing is sitting in the same spot for too long. Static pressure from being rolled or stacked for months can cause permanent impressions.<\/p>\n

And let\u2019s be real\u2014no one wants to do all this, especially if you\u2019re a small business owner juggling 10 tasks at once. The good news is that a 10-minute packing routine after every show will save you hours (and hundreds of dollars) in repairs and replacements later. I see clients all the time who cut corners on storage to save 10 minutes, then panic 2 weeks before a big show when their display is broken. It\u2019s not worth it.<\/p>\n

<\/p>\n

If you\u2019ve ever dealt with a damaged pop up display, or you\u2019re preparing to store your displays ahead of your next show, we\u2019re here to help. As a pop up displays supplier, we don\u2019t just sell displays\u2014we help our clients care for them, because we want your displays to work as hard for you as you work for your business. Whether you need replacement parts, purpose-made storage bags, or advice tailored to your specific display setup, reach out to our team to discuss your needs. We\u2019re here to make sure your pop up displays look as good on their 50th show as they did on their first.<\/p>\n

Trade Show Portable Booths<\/a> References:<\/p>\n

    \n
  1. Trade Show Exhibitors Association. Best Practices for Exhibit Storage and Maintenance. TEIA, 2022.<\/li>\n
  2. International Association of Exhibitions and Events. Guide to Preserving Exhibit Materials. IAEE, 2021.<\/li>\n
  3. Material Science and Engineering for Textiles. Polyester Fabric Storage Conditions and Longevity. Textile Research Journal, vol. 91, no. 15-16, 2021, pp. 1872-1885.<\/li>\n
  4. Aluminum Alloy Frame Durability for Portable Displays. Journal of Industrial Product Design, vol. 14, no. 2, 2020, pp. 45-52.<\/li>\n<\/ol>\n
    \n

    Shanghai Soki Display Manufacture Co., Ltd.<\/a>
    With abundant experience, we are one of the most professional pop up displays manufacturers in China. Please feel free to wholesale premium pop up displays in stock here and get quotation from our factory. All customized products are with high quality and competitive price.
    Address: Building 2, No. 215, Nandong Road, Luodian Town, Baoshan District, Shanghai
    E-mail: info@sokidisplay.com
    WebSite:     https:\/\/www.sokidisplay.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    As a pop up displays supplier, I\u2019ve spent the last 8 years hauling, repairing, and storing … How to store pop up displays when not in use?<\/span>Read more<\/a><\/p>\n","protected":false},"author":269,"featured_media":499,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[462],"class_list":["post-499","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-pop-up-displays-45e8-34eaae"],"_links":{"self":[{"href":"http:\/\/www.dealz17.com\/blog\/wp-json\/wp\/v2\/posts\/499","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.dealz17.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.dealz17.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.dealz17.com\/blog\/wp-json\/wp\/v2\/users\/269"}],"replies":[{"embeddable":true,"href":"http:\/\/www.dealz17.com\/blog\/wp-json\/wp\/v2\/comments?post=499"}],"version-history":[{"count":0,"href":"http:\/\/www.dealz17.com\/blog\/wp-json\/wp\/v2\/posts\/499\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.dealz17.com\/blog\/wp-json\/wp\/v2\/posts\/499"}],"wp:attachment":[{"href":"http:\/\/www.dealz17.com\/blog\/wp-json\/wp\/v2\/media?parent=499"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.dealz17.com\/blog\/wp-json\/wp\/v2\/categories?post=499"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.dealz17.com\/blog\/wp-json\/wp\/v2\/tags?post=499"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}